{"title":"PCR Workstation by Erlab","description":"","products":[{"product_id":"erlab-captairbio-391-pcr","title":"Erlab CaptairBio 391 PCR Workstation, 39\",  80-220V\/50-60Hz","description":"\u003cp\u003eCaptairBio 391 PCR Workstation, 39\",  80-220V\/50-60Hz\u003c\/p\u003e\n\n\u003cp\u003eComplete protection for your samples\u003cbr\u003e\nCaptairBio PCR Workstations are designed to protect sensitive biological applications against both environmental pollution and cross-contamination. They feature a high efficiency filtration system that provides a particle-free workstation around the manipulation, bringing HEPA filtered clean air down to the work surface. High efficiency UV light are used to decontaminate the worktop from biological cross-contamination between two operations.  The units will arrive completely knocked down and will require assembly. Equipped with standard 110V electrical and plug.   \u003cbr\u003e\n                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Smart Technology™ – an exclusive set of tools that consists of Smart-Light Communication™, chemical sensors (optional if adding carbon filters) and real-time status. Smart Technology gives you an easily identifiable method of communication regarding the sash being opened while the UV light is on, air face velocity is compromised: check sash, pre-filter, or HEPA\/ULPA, and fan status via a soft, LED band of light called Smart-Light.  Smart-Light is a light signature across the front panel which casts a stable LED glow ensuring proper operation. If normal operation is disrupted, the reassuring LED light pulses and sounds, drawing the attention of the operator only when necessary for the following:\u003c\/p\u003e     \n\n\u003cp\u003e2 beeps- Sash open with UV light on\u003cbr\u003e\n3 beeps- Air Face Velocity is compromised; check sash, pre-filter, or HEPA\/ULPA filter\u003cbr\u003e\n4 beeps- Fan Failure \u003cbr\u003e\n                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        CaptairBio 320 PCR Workstation will feature internal LED and UV lights only, the system will not feature a HEPA filter or will require replacement HEPA filters. The unit will come equipped with the needed stainless steel work surface.\u003c\/p\u003e \n\n\u003cp\u003eNote: The CaptairBio 321 and CaptairBio 391 will require HEPA filtartion to operate, and must be purchased seperatly. The unit does not come with a work surafce, commonly the stainless steel work surafce is purchased. \u003cbr\u003e\n      - GF4.HP will be the needed HEPA filter\u003c\/p\u003e  \n\n\u003cp\u003eThe Bio 321 and 391 will come equipped with the needed pre-filter M with the purchase of the unit.\u003c\/p\u003e    \n\n\u003cp\u003eCan be placed on exitsing bench, or we offer a base options. See 321 Mobicap or 321 Benchcap for Bio 320 or Bio 321, 391 Mobicap or 391 Benchcap for Bio 391.\u003c\/p\u003e","brand":"Erlab","offers":[{"title":"Default Title","offer_id":46752813547689,"sku":"CAPTAIRBIO-391-PCR","price":6055.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5452\/9953\/files\/download_e49d5e11-f0b0-4c06-baf0-0d3ae6741548.png?v=1772217231"},{"product_id":"erlab-captairbio-321-pcr","title":"Erlab CaptairBio 321 PCR Workstation, 32\", 80-220V\/50-60Hz","description":"\u003cp\u003eCaptairBio 321 PCR Workstation, 32\", 80-220V\/50-60Hz\u003c\/p\u003e\n\n\u003cp\u003eComplete protection for your samples\u003cbr\u003e\nCaptairBio PCR Workstations are designed to protect sensitive biological applications against both environmental pollution and cross-contamination. They feature a high efficiency filtration system that provides a particle-free workstation around the manipulation, bringing HEPA filtered clean air down to the work surface. High efficiency UV light are used to decontaminate the worktop from biological cross-contamination between two operations.  The units will arrive completely knocked down and will require assembly. Equipped with standard 110V electrical and plug.   \u003cbr\u003e\n                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Smart Technology™ – an exclusive set of tools that consists of Smart-Light Communication™, chemical sensors (optional if adding carbon filters) and real-time status. Smart Technology gives you an easily identifiable method of communication regarding the sash being opened while the UV light is on, air face velocity is compromised: check sash, pre-filter, or HEPA\/ULPA, and fan status via a soft, LED band of light called Smart-Light.  Smart-Light is a light signature across the front panel which casts a stable LED glow ensuring proper operation. If normal operation is disrupted, the reassuring LED light pulses and sounds, drawing the attention of the operator only when necessary for the following:\u003c\/p\u003e     \n\n\u003cp\u003e2 beeps- Sash open with UV light on\u003cbr\u003e\n3 beeps- Air Face Velocity is compromised; check sash, pre-filter, or HEPA\/ULPA filter\u003cbr\u003e\n4 beeps- Fan Failure \u003cbr\u003e\n                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        CaptairBio 320 PCR Workstation will feature internal LED and UV lights only, the system will not feature a HEPA filter or will require replacement HEPA filters. The unit will come equipped with the needed stainless steel work surface.\u003c\/p\u003e \n\n\u003cp\u003eNote: The CaptairBio 321 and CaptairBio 391 will require HEPA filtartion to operate, and must be purchased seperatly. The unit does not come with a work surafce, commonly the stainless steel work surafce is purchased. \u003cbr\u003e\n      - GF4.HP will be the needed HEPA filter\u003c\/p\u003e  \n\n\u003cp\u003eThe Bio 321 and 391 will come equipped with the needed pre-filter M with the purchase of the unit.\u003c\/p\u003e    \n\n\u003cp\u003eCan be placed on exitsing bench, or we offer a base options. See 321 Mobicap or 321 Benchcap for Bio 320 or Bio 321, 391 Mobicap or 391 Benchcap for Bio 391.\u003c\/p\u003e","brand":"Erlab","offers":[{"title":"Default Title","offer_id":46752813645993,"sku":"CAPTAIRBIO-321-PCR","price":5042.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5452\/9953\/files\/download_2cdf4b8f-022b-49f3-8f59-a2aa423e77e0.png?v=1772217247"},{"product_id":"erlab-captairbio-320-dead-air-box","title":"Erlab CaptairBio 320 PCR Workstation, 32\", 80-220V\/50-60Hz","description":"\u003cp\u003eCaptairBio 320 PCR Workstation, 32\", 80-220V\/50-60Hz\u003c\/p\u003e\n\n\u003cp\u003eComplete protection for your samples\u003cbr\u003e\nCaptairBio PCR Workstations are designed to protect sensitive biological applications against both environmental pollution and cross-contamination. They feature a high efficiency filtration system that provides a particle-free workstation around the manipulation, bringing HEPA filtered clean air down to the work surface. High efficiency UV light are used to decontaminate the worktop from biological cross-contamination between two operations.  The units will arrive completely knocked down and will require assembly. Equipped with standard 110V electrical and plug.   \u003cbr\u003e\n                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Smart Technology™ – an exclusive set of tools that consists of Smart-Light Communication™, chemical sensors (optional if adding carbon filters) and real-time status. Smart Technology gives you an easily identifiable method of communication regarding the sash being opened while the UV light is on, air face velocity is compromised: check sash, pre-filter, or HEPA\/ULPA, and fan status via a soft, LED band of light called Smart-Light.  Smart-Light is a light signature across the front panel which casts a stable LED glow ensuring proper operation. If normal operation is disrupted, the reassuring LED light pulses and sounds, drawing the attention of the operator only when necessary for the following:\u003c\/p\u003e     \n\n\u003cp\u003e2 beeps- Sash open with UV light on\u003cbr\u003e\n3 beeps- Air Face Velocity is compromised; check sash, pre-filter, or HEPA\/ULPA filter\u003cbr\u003e\n4 beeps- Fan Failure \u003cbr\u003e\n                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        CaptairBio 320 PCR Workstation will feature internal LED and UV lights only, the system will not feature a HEPA filter or will require replacement HEPA filters. The unit will come equipped with the needed stainless steel work surface.\u003c\/p\u003e \n\n\u003cp\u003eNote: The CaptairBio 321 and CaptairBio 391 will require HEPA filtartion to operate, and must be purchased seperatly. The unit does not come with a work surafce, commonly the stainless steel work surafce is purchased. \u003cbr\u003e\n      - GF4.HP will be the needed HEPA filter\u003c\/p\u003e  \n\n\u003cp\u003eThe Bio 321 and 391 will come equipped with the needed pre-filter M with the purchase of the unit.\u003c\/p\u003e    \n\n\u003cp\u003eCan be placed on exitsing bench, or we offer a base options. See 321 Mobicap or 321 Benchcap for Bio 320 or Bio 321, 391 Mobicap or 391 Benchcap for Bio 391.\u003c\/p\u003e","brand":"Erlab","offers":[{"title":"Default Title","offer_id":46752813711529,"sku":"CAPTAIRBIO-320-DEAD-AIR-BOX","price":2328.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5452\/9953\/files\/download_d292e778-b0f5-4bf2-bf38-cae290730694.png?v=1772217234"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5452\/9953\/collections\/Bio_391_PCR_Workstation.png?v=1769086438","url":"https:\/\/labproinc.myshopify.com\/collections\/workstaion-by-erlab\/erlab.oembed","provider":"Lab Pro Inc","version":"1.0","type":"link"}